(주)프로토콜마스터

회사개요

WT-328 Wireless Connenction Tester: It is a production test solution for next-generation WLAN protocol 802.11ax!

■ Provides 240M sample rate option (analysis bandwidth 1 BOM). Based on the test capabilities of the original WT-20X series,
the 802.11 ac 10M/80M service is supported
■ WT-328 has two independent test units. A single machine supports 2x2 True MIMO and MU-MIMO test.
Stacking muliple machine supports: 8x8 True MIMO
■ Supports the industry latest 802.11 ax standard, with typical residual EVM of 160M bandwidth reaching -48dB.
The testing statisfies the optimal poerformance of the DUT, with higher test accuracy and is conducive to improving
the straight-through rate
■ With individaul high-power output port (TX-AUX) and supports +10dBm output, providing high power to verify the maximum
receive level, in order to meet the requirement of the ultimate performance test in the R&D stage

Key features

WT-208C Wireless Network Multiplex Test Instrument

The King of efficiency that supports full-band testing!

■ Supports 400M-6GHz frequency band and it can get more testing capabilities via software upgrade

■ With advanced high-speed, highisolation switch matrix, it supports 8-port parrallel test and

multiple connections to maximize instrument utilization

■ Support True-MIMO test

■ WT-208C can protect DC voltage below 5V. Under the condition of contact discharge,

anti-static capacity can reach 7KV

Instroduction

WT-208C is a wireless connectivity tester intergrating R&D and production test capabilities. the WT-208C supports

True-MIMO test and can meet the complex and detail test requirements in the R&D environment. It has a very wide

working band and can support 400M-6GHz frequency band. Which can perfectly cover the test of the second station

of the mobile phone(WBG) and mainstream standard of IoT. Thet WT-208C also performs wxtremely well on the production line.

It has advanced 8-port parallel testing technology that greatly enhanced the production capacity per unit time. And the design of 8

dedicated Ethernet ports makes it easier to build test envirionments for routers.

▶Extensibel Business

- WLAN 802.11a/b/g/n/ac/p/ah

- Blutooth(1.0/2.0/3.0/4.0/4.1/4.2)

- IoT:ZigBee/Z-Wave/LoRa/802.11ah

- GNSS:GPS/BDS/GLONASS

- DECT(ETSI EN 300 176-1)

- MIMO

- LTE/WCDMA/GSM

Ket features

Link-100 Wireless Connectivity Tester

Introduction

The Link-100 tester is the first signaling test solution launched by iTest. It adopts module design, and is used with WT-series (WT2xx/WT3xx) of

iTest instruments to achieve Wi-Fi signaling mode of RF test. Tested in the user mode perspective, it sends and receives signals through

the analogy of the DUT peer device, detect DUT power, EVM, Freq Error, PER Sensitivity, throughput of RvR(Rate vs, Range) and other indicators,

also complete functional verification test, user mode test and certification test.

WT-2xx/3xx cna do non-signaling tests, they can also do signaling tests with Link-100. It can used to compare DUT indicator difference

between non-signaling and signaling tests. It eliminate the error caused by switching different instruments, which provides great convenience

for R&D testing.

Key featrues